Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in La Marque, TX
Gate access control in La Marque means keypads, card readers, and intercoms that have to survive salt air, high humidity, and the occasional tropical storm surge. Most La Marque homes were built in the mid-20th century or rebuilt quickly after Hurricane Ike in 2008, and the driveway gates installed during those rebuilds are now 15+ years old with corroded keypads, rust-seized locks, and operator boards that short out in wet weather. We dispatch crews locally from our Houston office and answer calls around the clock at (346) 787-1751.
Why La Marque Homes Are Different
La Marque sits just inland from Galveston Bay, close enough that persistent salt-laden gulf air corrodes unprotected steel and iron gate hardware far faster than in inland Houston suburbs. Hinges, rollers, latch plates, and automatic operator housings all take the hit. The waterlogged, expansive clay soils here caused widespread gate post heaving and sinking after Hurricane Ike’s 2008 storm surge, so gate repair in La Marque almost always requires structural post realignment alongside component replacement rather than a simple part swap.
After any significant tropical weather event, La Marque’s low-lying streets flood and then drain slowly, leaving gate posts soaked in standing water long enough to undermine concrete footings. A gate that looked straight before the storm is visibly out of plumb within days. Quoting a repair without checking footing integrity first almost always leads to a callback, so our technicians check post plumb and footing stability on every La Marque call before quoting any component work.
Our Main La Marque Services
La Marque homeowners call us most often for two things: repairing gates that have corroded or shifted out of alignment, and installing new gates built for coastal conditions. These are the three La Marque service pages with full details.
Gate Repair in La Marque
Gate repair here usually means a sagging leaf from worn hinges, a post that heaved out of plumb, or a latch that rusted shut. We check the footings first, then the hardware, then quote a written price before any work starts. For the full breakdown of Gate Repair in La Marque, including per-job pricing and what a same-day visit includes, see that page.
Gate Installation in La Marque
New gates in La Marque need marine-grade or powder-coated components, not the budget fencing hardware many post-Ike rebuilds used. We measure for wind load, check soil conditions at the post locations, and write a full scope before ordering anything. Details on Gate Installation in La Marque cover the process, materials, and pricing.
Gate Motor & Opener in La Marque
Automatic operators here fail most often from moisture intrusion and rust-seized mechanics. We service nine major automation brands and repair rather than replace whenever the motor itself is still sound. The Gate Motor & Opener in La Marque page covers diagnostics, brand-specific repair, and what a typical motor replacement costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in La Marque
Gate access control in La Marque is the system that decides who gets in: keypads, card readers, phone entry, and video intercoms. The salt air off Galveston Bay corrodes keypad contacts and card reader housings faster than inland, and post-Ike rebuilds often used entry systems not rated for coastal exposure, so most service calls here involve corroded contacts, moisture-damaged boards, or keypads that stopped reading input entirely. We troubleshoot all of it and document every setting before we leave, following the same commercial-grade documentation standard Adrian Vance developed in access-control work starting in 2014. For a full overview of what we service, see our Gate Access Control hub page.
Keypad Entry
Signs you need it
The keypad works intermittently, some buttons don’t register, or nothing happens when you enter the code.
What it costs in La Marque
Keypad replacement in La Marque typically runs $185-$400 depending on the brand and whether the wiring in the post is still sound.
How we do it
We test the wiring first, then replace or rebuild the keypad, seal the housing against moisture, and photograph the finished setting.
Phone Entry
Signs you need it
Visitors can’t reach you through the call box, or the unit dials but the relay won’t release the gate.
What it costs in La Marque
Phone entry wiring and board repair in La Marque typically runs $220-$450, with full unit replacement landing between $400 and $800.
How we do it
We bench-test the board, run a continuity check on the phone line to the house, and swap only the failed component rather than the whole unit when possible.
What Gate Access Control Costs in La Marque
| Item | Typical range in La Marque |
|---|---|
| Keypad replacement | $185-$400 |
| Phone entry board repair | $220-$450 |
| Access control diagnostic | $95-$185 |
How much does gate access control repair cost in La Marque?
Most access control repairs in La Marque run between $185 and $450 depending on whether it’s a keypad, card reader, or phone entry board. Full system replacement runs higher, and we always write the exact price before starting. Call (346) 787-1751 for an exact quote, free.
Can you repair a salt-corroded keypad in La Marque?
Yes, and we see it constantly. Corroded contacts can often be cleaned and resealed; if the board is too far gone we replace the keypad. The repair is priced in writing before any work begins. Call (346) 787-1751.
Gate Parts & Welding in La Marque
Gate parts and welding in La Marque usually means replacing hinges, rollers, or posts that salt air and shifting clay have already compromised. The 2008 post-Ike rebuilds put a lot of budget fencing hardware into coastal conditions it was never spec’d for, so we now replace those parts with marine-grade or powder-coated components and weld only after the footing is confirmed sound. For a full breakdown of what we fabricate and stock, see our Gate Parts & Welding hub page.
Hinge Replacement
Signs you need it
The gate leaf sags, scrapes the ground, or the hinge pin shows visible rust scale and play.
What it costs in La Marque
Hinge replacement in La Marque typically runs $145-$280 per hinge including the weld and a corrosion-resistant treatment.
How we do it
We support the leaf, cut out the old hinge, weld in the new one, and photograph the finished weld before it’s painted.
Post Replacement
Signs you need it
The post leans, the base shows spalling concrete, or the gate won’t latch because the post moved.
What it costs in La Marque
Post replacement in La Marque typically runs $475-$750 per post including concrete removal, new footing, and a galvanized or powder-coated post.
How we do it
We cut out the old post, auger a deeper footing, set the new post in concrete, and brace it until it cures.
What Gate Parts & Welding Costs in La Marque
| Item | Typical range in La Marque |
|---|---|
| Hinge replacement (per hinge) | $145-$280 |
| Post replacement (per post) | $475-$750 |
| Gate roller replacement (per roller) | $85-$160 |
How much does it cost to weld a gate hinge in La Marque?
A single hinge replacement in La Marque typically costs $145 to $280, including the weld and corrosion treatment. We quote the full job in writing before any work starts. Call (346) 787-1751 for an exact number.
Do you replace gate posts that heaved after a storm in La Marque?
Yes, and it’s common here after heavy rain or tropical systems. We remove the old post, set a new footing below the clay line, and brace it while the concrete cures. Call (346) 787-1751 for a free estimate.
Brands We Service in La Marque
We service LiftMaster, FAAC, BFT, and Linear automation systems in La Marque, and we stock common replacement parts for each locally so repairs don’t wait on shipping. See our brands for the full list of what we work on.
Pricing for Gate Repair in La Marque, TX
| Service | Typical range in La Marque |
|---|---|
| Gate repair diagnostic | $95-$185 |
| Hinge replacement (per hinge) | $145-$280 |
| Post replacement (per post) | $475-$750 |
| Gate roller replacement (per roller) | $85-$160 |
| Keypad replacement | $185-$400 |
| Phone entry board repair | $220-$450 |
| Gate motor replacement (swing) | $850-$1,400 |
| Slide gate motor replacement | $950-$1,600 |
| Welding repair (per hour) | $95-$145 |
In La Marque, prices push toward the upper end when salt corrosion has spread into the post or the footing needs re-pouring, not just a part swap. Every price is written and handed to you before any work starts, under Haven Standard Clause 1.
Neighborhoods We Serve in La Marque
We work across La Marque, from the established mid-century neighborhoods near the center of town to the post-Ike rebuilds closer to the bay. Response time for most La Marque calls is same-day or next morning, depending on when you call.
- Highland Bayou
- Omega Bay
- La Marque Heights
- Benson Heights
- Lakeside
Service Area - Cities Near La Marque
We also serve the communities around La Marque, including Texas City, TX, Santa Fe, TX, Dickinson, TX, and Bacliff, TX. Same coastal conditions, same written-price standard, same documented photo record on every visit.
Serving La Marque, TX - Our Local Coverage Area
We’re based in the La Marque area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in La Marque
Most La Marque calls are same-day or next morning. A live person answers at (346) 787-1751 around the clock, so you won’t leave a voicemail and wait for a callback. Emergency gate failures that leave a driveway unsecured get priority dispatch.
Most component-level repairs like hinges, rollers, and keypads don’t require a permit. A full gate or post replacement may depending on the setback and whether it’s in a flood zone, which much of La Marque is. We’ll tell you exactly what applies before we quote.
Yes, that’s the standard on every job. Under Haven Standard Clause 1, the flat price is written and handed to you before any tool comes out, and the price we write is the price you pay. No surprise invoice at the end.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What La Marque Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E.