Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Jacinto City, TX
Gate access control in Jacinto City usually means retrofitting a keypad or intercom onto a steel or wrought-iron gate that has already survived decades of Ship Channel air and at least one major flood. The work here starts with the post and the hardware, not the electronics, because a keypad mounted on a rust-thinned frame or a leaning post will fail within a season. Most Jacinto City calls come from homeowners whose gate still swings but whose latch, hinges, or motor no longer respond the way they did before the last heavy rain. Call (346) 787-1751 and we’ll send a technician who documents what he finds before touching anything.
Why Jacinto City Homes Are Different
Jacinto City sits directly against the petrochemical and refinery corridor along the Houston Ship Channel. Airborne sulfur compounds settle on iron and steel constantly, and the result is rust that forms faster here than in Galena Park or South Houston. We regularly see gate frames with paper-thin metal where the bottom rail meets the post, hidden behind a coat of paint that looks fine from the driveway. On top of that, the city’s low elevation means gate posts and hinge bases go underwater during flood events, and Hurricane Harvey was not a one-time thing. The soil is Harris County gumbo clay, which swells when saturated and shrinks when dry, so a post that was plumb in February can be leaning by August. In Jacinto City, we never adjust a gate without checking the post footings first because the footing is usually the actual problem.
The housing stock here is small post-WWII frame homes built mainly between the 1940s and 1960s, on narrow lots where chain-link driveway gates and original ornamental wrought iron are the standard. Much of that hardware is original or near-original. Hinges that were installed when Eisenhower was president have been rusting and grinding through seventy Houston summers. When we quote a repair in Jacinto City, the written price almost always includes corrosion remediation and post realignment together because the two failures compound each other.
Our Main Jacinto City Services
Jacinto City homeowners call us most often for two problems: a gate that will not stay shut or latched, and a motor that quit responding. These two are covered below, with the three service pages for gate repair, installation, and motor work linked from their sections.
Gate Repair in Jacinto City
A leaning or dragging gate in Jacinto City is rarely just a hinge issue. The clay soil near the Ship Channel floodplain expands after summer storms and the post shifts, then the gate binds, then the motor burns out trying to push it. We quote the post, the hinge, and the realignment as one written repair, not three surprise add-ons. Full details are on the Gate Repair in Jacinto City page.
Gate Installation in Jacinto City
New gate work on these narrow lots means measuring carefully around a 40-foot driveway and a fence line that may have shifted over the years. We set new posts below the active clay layer so the gate does not move with the season. A full scope, with the price in writing, is covered on the Gate Installation in Jacinto City page.
Gate Motor & Opener in Jacinto City
Motors on Jacinto City gates fail for two reasons: corrosion on the control board from constant humidity, or the operator burning out while trying to move a gate that soil movement has put out of plumb. We diagnose the motor and the post in the same visit so you do not pay twice. See the Gate Motor & Opener in Jacinto City page for ranges and coverage.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Jacinto City
Gate access control in Jacinto City means adding or repairing the entry system on a gate that is already fighting rust, soil movement, and old framing. The specific challenge here is that electronics get mounted on hardware that was never built to hold them, so the bracket, the wiring run, and the post condition matter as much as the keypad or card reader itself. We also see entry systems damaged by floodwater intrusion into the low-voltage wiring, which is common on lots that held water during Harvey. This page covers the access control sub-jobs we do most in Jacinto City; the full service detail lives on our Gate Access Control page.
Keypad Entry
Signs you need it
You are handing out keys or remote controls to family members, contractors, or delivery drivers, and you have lost track of who has one.
What it costs in Jacinto City
Keypad entry systems in Jacinto City typically run $180-$1,200 depending on whether we are mounting a standalone keypad or replacing the control board and wiring.
How we do it
We mount the keypad on a reinforced bracket, run sealed low-voltage wire, set the access codes, and photograph the finished wiring before we leave.
Video Intercom
Signs you need it
You cannot see who is at the gate from the house, or your existing intercom cuts out whenever the weather turns humid.
What it costs in Jacinto City
Video intercom systems in Jacinto City generally run $600-$3,000 installed, with the higher end including a monitor in the house and remote calling from your phone.
How we do it
We set the camera angle, run the cable through weatherproof conduit, connect the indoor monitor, and test the call function with someone at both ends.
What Gate Access Control Costs in Jacinto City
| Item | Typical range in Jacinto City |
|---|---|
| Keypad entry | $180-$1,200 |
| Video intercom | $600-$3,000 |
| Access control wiring repair | $150-$800 |
Can you install a keypad on an old wrought iron gate in Jacinto City?
Yes, but we need to check the metal thickness first. If the frame is too thin, we weld a backer plate on before mounting the keypad. Call (346) 787-1751 and we will quote it in writing.
Does flooding ruin gate access systems in Jacinto City?
It can. Water entering low-voltage wire splices corrodes the connections and shorts the controller. We replace splices with sealed, direct-burial connectors and document the repair.
Gate Parts & Welding in Jacinto City
Most Jacinto City gates were installed before modern coated hardware existed, so the hinges, latches, and post bases have been rusting for half a century or more. The Ship Channel air means new steel starts rusting within months, so we weld only with primed or galvanized stock and clean the area before any bead goes down. This page covers the parts and welding work we do most often in Jacinto City; the full service detail lives on our Gate Parts & Welding page.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground at the latch side, or you can lift the gate up and feel play in the hinge barrel.
What it costs in Jacinto City
Hinge replacement runs $150-$450 per hinge, including cutting off the old hardware and cleaning the mounting surface.
How we do it
We support the gate, cut away the rusted hinge, grind the post clean, weld on a greasable replacement, and photograph the new weld.
Post Replacement
Signs you need it
The post leans, wobbles when pushed, or the concrete base is cracked and soft around the pipe.
What it costs in Jacinto City
Post replacement in Jacinto City runs $300-$1,500 per post depending on depth, concrete volume, and whether the old post is set in clay or a buried slab.
How we do it
We dig out the old footing, set a new post below the active clay line, backfill with concrete, and brace it square until it cures.
What Gate Parts & Welding Costs in Jacinto City
| Item | Typical range in Jacinto City |
|---|---|
| Hinge replacement | $150-$450 per hinge |
| Post replacement | $300-$1,500 per post |
| Custom welding repair | $200-$900 |
Can you weld a rusted ornamental gate in Jacinto City, or is it too far gone?
Usually we can save the gate if the top rail and stiles are still sound. We cut out the rusted section, weld in new steel, and grind it flush before primer. Call (346) 787-1751 for a written quote.
Why do Jacinto City gate posts lean after every flood?
The Harris County clay soil expands when saturated, lifting the footing, then shrinks as it dries and leaves a void around the post. We set new posts deeper, below the active shrink-swell zone, and check depth on every repair.
Brands We Service in Jacinto City
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. We keep common boards, limit switches, and photo-eyes stocked for Jacinto City calls, which means most motor repairs are same-day. For details on all brands, see our brands.
Pricing for Gate Repair in Jacinto City, TX
| Service | Typical range in Jacinto City |
|---|---|
| Gate repair (general) | $150-$1,200 |
| Gate installation | $1,200-$6,000 |
| Gate motor & opener repair | $175-$1,400 |
| Keypad entry | $180-$1,200 |
| Video intercom | $600-$3,000 |
| Access control wiring repair | $150-$800 |
| Hinge replacement | $150-$450 per hinge |
| Post replacement | $300-$1,500 per post |
| Custom welding repair | $200-$900 |
| Rail repair | $120-$500 |
| Gate roller replacement | $80-$250 per gate |
| Latch replacement | $70-$300 |
In Jacinto City, corrosion pushes prices toward the upper end of any range, because rusted hardware takes longer to remove cleanly and we will not weld to a dirty surface. The price we quote is the price you pay, in writing, before we start.
Neighborhoods We Serve in Jacinto City
We cover the entire Jacinto City area, including the older sections near the Ship Channel and the residential streets off Holland Avenue and Market Street. Our typical dispatch time to most Jacinto City addresses is under an hour for emergency repair calls.
- Jacinto City proper
- The area near Jacinto City Elementary
- Streets off Holland Avenue
- The Market Street corridor
- Homes near the city park and community center
Service Area - Cities Near Jacinto City
Our technicians also serve the surrounding communities on Houston’s east and south sides. We dispatch locally to League City, TX, Webster, TX, Dickinson, TX, and Friendswood, TX, with the same written price and photo documentation on every job.
Serving Jacinto City, TX - Our Local Coverage Area
We’re based in the Jacinto City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Jacinto City
We dispatch from our Houston office with technicians serving Jacinto City locally. Most calls get same-day service, and a live person answers the phone 24 hours a day. Call (346) 787-1751 and we will give you an arrival window before we hang up.
Most residential gate repair does not require a permit in Jacinto City, but a new installation on the front setback can trigger a permit in some cases. We check the current requirements when we quote the job and include any fees in the written price.
No. We write the price before work starts, and if we find additional corrosion or a post out of plumb, we stop and hand you a revised written scope before any extra work is done. You approve every dollar before we spend it.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Jacinto City Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.